";s:4:"text";s:3465:" That is, it has to be tuned between 88 and 108 MHz. Can I use 23 AWG? FM can also be called as An FM receiver is an FM demodulated, where the FM signal is feed by receiving with an antenna. I will reply as soon as possible.Please point to me the circuit diagram of each block in fm receiver in this circuit? A simple fm radio transmitter circuit which covers frequencies from 88 to 108 MHz. The receiver can be operated off a 6V-9V battery.This article was published in June 2003 and was recently updated on 28 November 2018.which kind of antenna is useful here, in this receiver?You can use simple single strand copper wire or whip antenna for testing.HEy !! This circuit can be used as a voice transmitter or audio signal transmitter by adding Encoder and Decoder at receiver we can transmit digital data also. Fine tuning of VC1 can also be done using a handheld FM receiver. FM Receiver Circuit E xplanation. Presented below is an electronics circuit for FM receiver along with its full explanation.Here’s a simple FM receiver with minimum components for local FM reception. Transistor BF495 (T2), together with a 10k resistor (R1), coil L, 22pF variable capacitor (VC), and internal capacitances of transistor BF494 (T1), comprises the The resonance frequency of this oscillator is set by trimmer VC to the frequency of the transmitting station that we wish to listen. The amplified RF signal is then transmitted using antenna.This circuit can be used at any place to transmit audio signals using FM transmission, especially at institutions and organizations.This circuit is for educational purposes and may require more practical approach.What is a Power Amplifier? In other words, the frequency of the oscillator generated circuit varies with the application of an input signal, producing a frequency modulated signal.Audio input from the microphone or any other device is first amplified using the common emitter configuration of BC109.